Product Description
DLS Ultimate A4 - 880Watts 4 CH Amplifier
DLS ULTIMATE series A4 is a powerful 4-channel amplifier. The amplifier is 1 ohm stable and provides a power output of 4 x 85 Watts with 4-ohm stereo and 2 x 250/400 Watts with 4/2-ohm mono bridge-connection.
- Built-in variable 50-125 Hz low pass filter for subwoofers on all channels.
- Additionally, a built-in variable 20-200 Hz high pass filter that can be used as a subsonic filter or high-pass filter for front systems.
- The frequency on the filter can be switched so that two of the channels can be used for mid-range woofers.
- Dual power terminals where you can connect dual power feeds or a DLS Power Cap.
- Output for electronically controlled cooling fan.
- RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion.
The Ultimate series amplifiers are known for the good sound quality with a detailed, high resolution sound. The amplifiers are often used in SQ competitions in both IASCA and EMMA competitions. The amplifiers are used in cars winning both European and World championsships.
| Number of channels | 4 |
| Amplifier class | AB |
| Mono bridge mode 2 ohm | 2 x 400 W RMS |
| Mono bridge mode 4 ohm | 2 x 250 W RMS |
| Output power in 1 ohm | 4 x 220 W RMS |
| Output power in 2 ohm | 4 x 145 W RMS |
| Output power in 4 ohm | 4 x 85 W RMS |
| Damping factor | > 200 |
| S/N ratio, A-weighted | > 100 dB |
| Frequency range | 10 Hz - 50 kHz |
| Input impedance, high level | N/A |
| Input sensitivity | 0,2 - 7 V |
| Input impedance | > 10 kohm |
| Filters channel A & B | LP: 50-125 Hz. HP: 20-200 Hz / 60-600 Hz |
| Remote bass level control | No |
| Filters channel C & D | LP: 45-200 Hz / 90-400 Hz. HP: 20-200 Hz |
| Low level output | No |
| Remote phase shift control | No |
| High level input with auto start | No |
| Dual DC inputs | Yes |
| External cooling fan terminal | Yes |
| Power consumption (idle) | 1,5 A |
| Power consumption (max) | 95 A |
| Dimension (W x D x H) | 465 x 240 x 73 mm (18,30 x 9,45 x 2,87 inches) |
| Rec. power cable | Minimum 4AWG / 21 mm2 |
| Weight | 6,6 kg ( 14,55 lb) |




