Product Description
AUDISON PRIMA The OEM Integrator
With the totally new Prima range, Audison wants to meet the interest of the enthusiasts who like to appreciate all the nuances of the musical message with components that are perfectly integrated in the OEM system of the car.
The AUDISON AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications. The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 480 W total can be achieved in an extremely compact case . The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier.
REVIEW AUDISON PRIMA AP8.9Bit : http://www.udc-caraudio.com/webboard/index.php?topic=354.0
Presets
7 Drive preset for 7 different system configuration selectable by a switch in the front panel without pc software.
USB connection
USB connection to run the dedicated PC software and to download custom presets.
Digital Input
The bit amplifiers also feature an optical digital input (96 kHz/24 bit) selectable via the DRC, making them fully compatible with the Audison Full DA technology.
DRC
DRC input (optional)
Powered output
8 channel powered output.
Subwoofer line output
Subwoofer line output to drive an auxiliary amplifiers.
Input
All the bit models feature six analog input channels, four for the Front/Rear and two more selectable channels, all equipped with sensitivity adjustment manageable via software. The two auxiliary
Automatic Speaker Presence
Available as an optional plug-in accessory, this circuit provides the ability to simulate the OEM speakers’ presence during the short time frame the head unit performs the check after being turned on,
Power Supply | |
Voltage | 7.5 ÷ 15 VDC |
Idling current (@ Dual Power Setting) | 1.5 A |
Switched off | <0.04 mA |
Consumption @ 14.4 VDC, 20 Max Musical Power (without CPL) |
20A |
Remote In | 7 ÷ 15 VDC (1 mA) |
Remote Out | 11 ÷ 15 VDC (200 mA) |
Fuse (AFS) | 30A |
ART (Automatic Remote Trun on/off) | Speaker to input - selectable |
AST (Automatic Signal trun on/off) | Pre-In to input to input - selectable |
CPL (Continuous Power Limiting) | Max continuous power to - selectable |
Amplifier stage | |
Distortion -THD@1kHz,4Ω;90%Power | 0.05 % |
Bandwidth @ -3 dB, 2 VRMS, 4 Ω | 10 ÷ 22k Hz |
S/Nratio@Aweighted,1V,MaxPower | 95 dBA |
Damping factor @ 1 kHz, 2 VRMS, 4 Ω | >70 |
Pre-In sensitivity | 2 ÷ 15 VRMS |
Pre-In impedance | 15 kΩ |
Loadimpedance (Min@DualPowerMode- Hi-Current) | |
• 8 Ch | 2 Ω |
• 4 Ch - Bridge (1-2)(3-4)(5-6)(7-8): | 4 Ω |
Output power (RMS) @ 12.0 - 14.4 VDC, 1% THD: | |
• 8 Ch @ 4 Ω | 35 W x 8 |
• 8 Ch @ 2 Ω | 65 W x 8 |
• 4 Ch @ Bridge (1-2)(3-4)(5-6)(7-8) @ 4 Ω | 130 W x 4 |
Output power (RMS) @ 12.0 - 14.4 VDC, 10% THD: | |
• 8 Ch @ 4 Ω | 45 W x 8 |
• 8 Ch @ 2 Ω | 85 W x 8 |
• 4 Ch @ Bridge (1-2)(3-4)(5-6)(7-8) @ 4 Ω | 170 W x 4 |
CEA SPECIFICATION | |
Output power @ 4 Ω, 1% THD+N,14.4 V | 35 W x 8 Ch |
SN ratio (ref. 1 W output) | 75 dBA |
SINGAL CONNECTIONS | |
Sub Out (RCA-Pre Out) | 0 -4 RMS Max |
Input Stage | |
- Config 1 | Hi / Lo Level FL-FR-RL-RR + N.2 customizable |
- Config 2 | Hi / Lo Level FL-FR-RL-RR + Stereo Aux In (DRC select) |
- Optical IN (max 96 kHz / 24BIt) | S/P-DIF PCM 96kHz / 24Bit Max |
DIGITAL SIGNAL PROCESSOR | |
(32 bit Cirrus Logic; Clock speed: 147 MHz) | |
Crossover: | Full / Hi Pass / Lo Pass / Band Pass |
Crossover type and slope: | Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB |
Crossover Frequency | 68 steps @ 20 ÷ 20k Hz |
Phase inversion: | 0° / 180° |
Analog Input Equalizer: | Automatic De-Equalization |
Output Equalizer | N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz |
Time Alignment Distance | 0 ÷ 510 cm / 0 ÷ 200.8 in. |
Time Alignment Delay | 0 ÷ 15 ms |
Time Alignment Step | 0,08 ms; 2,8 cm / 1.1 in. |
Time Alignment Fine Set | 0,02 ms; 0,7 cm / 0.27 in. |
SYSTEM SET : Preset (Drive Preset) | Rotary switch for 7 installation Presets |
Acoustic Preset | N.2 DSP Memory, DRC selectable |
CONTROL CONNECTIONS | |
From / to personal computer | 1 x micro USB-B |
To Audison Electronics | DRC controls |
ASP | Automatic Speaker Presence |
Optical / AUX select | 12V control for Optical In / AUX enable |
Master enable | 12V control for Master In enable |
GENERAL REQUIREMENTS | |
PC connections | Micro USB (1.1 / 2.0 / 3.0) |
Software/PC requirements: | Microsoft Windows (32/64 bit): XP, Vista, Windows 7, Windows 8 |
Graphic card min. resolution: | 800 x 600 |
Ambient operating temperature range | 0 °C to 55 °C (32°F to 131°F) |
SIZE / WEIGHT | |
Max size (mm/in.): | 198 x45,50 x 134 /7.8 x1.8 x5.27 |
Weight (kg/lb): | 1.5 / 3.7 |
The DRC is the digital interface between the AP8.9 bit and the user. The DRC mounted in the vehicle dashboard, provides access to control of the inputs and volume adjustments, balance, fader and subwoofer volume. Providing source selection between main, aux and optical inputs, it also provides four of the configurations created and saved by the bit one right at hand. The DRC also controls the functions of the Audison Thesis amplifiers when these are installed in the same system.
DRC Cable Extension kit for installations on especially long vehicles. Total length of the supplied cable with the extension is equal to 6,5 m / 225,90".
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 1,5 m / 59,05”.
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 4,5 m/177,16”
Optical adapter to extend optical cables featuring TOSLINK connectors.