Product Description
DLS Reference RA30 - 565 Watts 3CH Amplifier
DLS REFERENCE series RA30 is a 3-channel amplifier rated at 2 x 70 + 1 x 265 Watts.
- Built-in variable 40-125 Hz switchable low pass filter for subwoofers.
- Built-in/switchable variable 45-125 Hz high pass filter that can be used as a subsonic filter or high-pass filter for front systems.
- Grand bass 0-18 dB.
- Phase shift control.
- Remote level and phase control included
- High level input with automatic start.
- RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion.
| Number of channels | 3 |
| Amplifier class | AB |
| Output power in 2 ohm | 2 x 100 W RMS |
| Output power in 4 ohm | 2 x 70 W RMS |
| Mono sub channel 2 ohm | 365 W RMS |
| Mono sub channel 4 ohm | 265 W RMS |
| Damping factor | > 200 |
| S/N ratio, A-weighted | > 100 dB |
| Frequency range | 10 Hz - 50 kHz |
| Input sensitivity | 0,2 - 7 V |
| Input impedance | < 10 kohm |
| Input impedance, high level | 330 ohm |
| High level input with auto start | Yes |
| Remote bass level control | Yes |
| Low level output | No |
| Remote phase shift control | Yes |
| Filters channel A & B | HP: 45 - 125 Hz |
| Phase control for subwoofers | 0-180 degrees variable |
| Filter sub channel | LP: 40 - 125 Hz |
| Grand bass filter | 0-18 dB @40 Hz |
| Power consumption (idle) | 0,9 A |
| Power consumption (max) | 70 A |
| Rec. power cable | Minimum 4AWG / 21 mm2 |
| Fuses | 2 x 35 A |
| Dimension (W x D x H) | 385 x 245 x 59 mm (15,15 x 9,65 x 2,33 inch) |
| Weight | 4,4 kg ( 9,7 lb) |
