Product Description
DLS Ultimate A2 - 450 Watt 2CH Amplifier
DLS ULTIMATE series A2 is a two-channel amplifier. Power output of 2 x 85 Watts with 4-ohm stereo and 290/450 Watts with 4/2-ohm mono bridge-connection.
The amplifier is 1 ohm stable.
- Built-in variable 50-125 Hz switchable low pass filter for subwoofers.
- Built-in/switchable variable 20-200 Hz high pass filter that can be used as a subsonic filter or high pass filter for front systems.
- RMS output power @ 13,8 V DC feed with max 0,1% distortion, 20 Hz - 20 kHz
The Ultimate series amplifiers are known for the good sound quality with a detailed, high resolution sound. The amplifiers are often used in SQ competitions in both IASCA and EMMA competitions. The amplifiers are often used in cars winning both European and World championsships.
Number of channels | 2 |
Amplifier class | AB |
Mono bridge mode 2 ohm | 450 W RMS |
Mono bridge mode 4 ohm | 290 W RMS |
Output power in 1 ohm | 2 x 220 W RMS |
Output power in 2 ohm | 2 x 145 W RMS |
Output power in 4 ohm | 2 x 85 W RMS |
Damping factor | > 200 |
Input impedance, high level | N/A |
S/N ratio, A-weighted | > 100 dB |
Low level output | No |
Frequency range | 10 Hz - 50 kHz |
High level input with auto start | No |
Input sensitivity | 0,2 - 7 V |
Input impedance | > 10 kohm |
High pass filter | 20 - 200 Hz |
Low pass filter | 50-125 Hz |
Power consumption (idle) | 0,6 A |
Power consumption (max) | 60 A |
Rec. power cable | Minimum 5AWG / 16 mm2 |
Fuses | 2 x 30 A |
Dimension (W x D x H) | 265 x 240 x 73 mm (10,43 x 9,45 x 2,87 inch) |
Weight | 3,7 kg ( 8,16 lb) |