Product Description
DLS CA 12 is a powerful mono amplifier with a nominal output of 220 Watts in 4 ohm, 400 Watts in 2 ohm load, and 500 Watts in 1 ohm load.
- Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
- Variable subsonic filter 15-150 Hz.
- Continuously variable phase control 0-180 degrees.
- Built-in protection circuits shut down the amplifier in the event of overloads.
- High level input with automatic start.
- Cooling fan in the bottom plate.
- RMS output power @ 13,8 V
This is one of our most popular mono amplifiers with high reliabilty.
Number of channels | 1 |
Amplifier class | AB |
Output power in 1 ohm | 500 W RMS |
Output power in 2 ohm | 400 W RMS |
Output power in 4 ohm | 220 W RMS |
Mono bridge mode 4 ohm | N/A |
Damping factor | > 100 |
S/N ratio, A-weighted | > 100 dB |
Frequency range | 10 Hz - 35 kHz |
Low level output | No |
Input sensitivity | 0,25 - 5 V |
Input impedance | > 10 kohm |
Input impedance, high level | 100 ohm |
High pass filter | 15 - 150 Hz |
Low pass filter | 50 - 500 Hz |
Phase control for subwoofers | 0-180 degrees con. variable |
High level input with auto start | Yes |
Power consumption (idle) | 0,8 A |
Power consumption (max) | 60 A |
Rec. power cable | Minimum 5AWG / 16 mm2 |
Fuses | 2 x 30 A |
Dimension (W x D x H) | 70 x 312 x 268 mm / 2,92 x 12,28 x 10,55" |
Weight | 3,8 kg / 8,4 lb |