> PRODUCT > > SUBWOOFERS > PUNCH P1S4-10 ( 1 Pcs.)
Click Zoom

PUNCH P1S4-10 ( 1 Pcs.)

Ask question about this product

Price : 0.- บาท


Product Description

Preview Features Specifications Box Advisor Wiring Wizard

ROCKFORD FOSGATE P1S4-10 - 4-Ohm Voice Coil, 250 Watts RMS

 

Rockford Fosgate P1 10" are the first in a family of world famous subwoofers called "The Punch". During their inception in the 1980's, they quickly became "The Woofer of Choice" for fanatic car audio systems, with a continued tradition today. Kevlar fiber reinforced paper cones deliver bass impact you can feel, and our VAST technology increases surface cone area up to 25%. Best in standard sealed and vented enclosures. Includes soft touch ABS tri trim ring.

 

Rockford Fosgate P1 10” is the first in a family of famous “Punch” subwoofers. The P1S4-10 features a 4-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.
 

  • Linear spider with embedded 16 AWG tinsel leads
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Kevlar fiber reinforced paper cone
  • StampCast basket with integrated spider venting
  • Soft touch ABS trim ring with optional grille
  • Custom 10-AWG nickel plated push terminals
  • Extended pole piece and bumped vented backplate
  • Protective PVC textured magnet cover

 

 

 

 

 

Anodized Aluminum Voice Coil Former

Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

 

Two things generally happen when voice coils heat-up.

  1. They can generate heat close to the melt-down temp of their adhesive bonds which leads to eventual failure.
  2. Voice coil dc resistance increases and reduces SPL output.

Solution... Rockford Fosgate subwoofers use aluminum formers or voice coils for their excellent heat dissipation and SPL capabilities unlike many other plastic substitutes.

 

 

 

 

Stitched Tinsel Leads

Improved reliability and performance by reducing fatigue and possible shorting.

 

Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.

These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.

 

 

 

 

Flex Fit Basket - Subwoofer

The slot mounted frame pattern allows fine-tuning of the subwoofer's mounting position.

 

The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

 

 

 

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

 

 

 

 

 

CEA-2031 Compliant: CEA-2031 Guidelines
Size: 10"
Nominal Impedance: 4-Ohm
Power Handling (Watts RMS): 250 Watts RMS
500 Watts Max
Voice Coil Diameter: 2.0" (51.6 mm)
Magnet Weight (oz): 45 oz.
1.28 kg.
Speaker Connector: Dual 10 AWG compression
Fs (Hz): 30
Re (Ohms): 3.60
Le (mH): 2.8
Qms: 3.00
Qes: 0.61
Qts: 0.51
Vas (Liters): 40
Sd (cm2): 370
SPL (dB @ 1w/1m): 85
Xmax (mm): 9.4
Woofer Displacement (in): 0.085 cu. ft.
(2.4 Liters)
Cutout Diameter (in): 9.14 in.
(232 mm)
Mounting Depth (in): 5.33 in.
(135.4 mm)
Shipping Weight: 10.9 Lbs.
(4.94 kg)

 

Sealed - Recommended
Woofer Quantity:  

Sealed Enclosure
? Vb 0.59 cu. ft.
? F3 48.9 Hz
? Qtc 0.87
? Height 12 in.
? Width 14 in.
? Depth 9.25 in.
? Spk. Cutout 9.14 in.
? Spk. Depth 5.33 in.
? Vd 0.085 cu. ft.
• All sides use 3/4" thick MDF.
• All box dimensions are external.
• Dimensions above include Vb + woofer displacement.
Export Option
Export to BoxWizard
Modify This Box		 Export to WiringWizard
Wire This Woofer 		s

Vented - Recommended
Woofer Quantity:  

Vented Enclosure
? Vb 1.40 cu. ft.
? Fb 37.3 Hz
? F3 32 Hz
? Height 12 in.
? Width 20 in.
? Depth 14 in.
? Np 1port
? Dp 3 in. diameter
? Lp 9.8 in. long
? Spk. Cutout 9.14 in.
? Spk. Depth 5.33 in.
? Vd 0.085 cu. ft.
? Vp 0.040 cu. ft.
• All sides use 3/4" thick MDF.
• All box dimensions are external.
• Dimensions above include Vb + woofer/port displacement.
• Port diagram for reference only and may require alternate placement.
• An infrasonic filter is required for reliable performance in vented designs.
Export Option
Export to BoxWizard
Modify This Box		 Export to WiringWizard
Wire This Woofer 		s

 

Possible Wiring Configurations
The below woofer wiring diagrams are possible with the voice coil type used in this model. Care should be taken to select an amplifier that can safely handle the woofer's total impedance load.
For more information, refer to our Glossary definitions for Ohm and Impedance.
 
1 Woofer
 
2 Woofers
 
3 Woofers
 
4 Woofers