Product Description
ROCKFORD FOSGATE PRIME M1200-1D
The Prime M1200-1D amplifier is a 1200 Watt mono high efficiency Class-D amplifier specifically designed for Marine and Powersport applications. The amplifier printed circuit board is conformal coated with a UV resistant finish that conforms to industry standard UV and Salt-Fog specifications, and the Class-D circuit topology is so efficient, it consumes much less current from your charging system over traditional Class-A/B amplifiers.
The M1200-1D is a 1200 Watt mono high efficiency Class-D marine amp conforming to UV and Salt-Fog protection standards. Amplifier features on-board Punch EQ, infrasonic filter, variable crossover and tri-state protection circuits.
- 12dB/octave crossover
- 4 Gauge power/ground terminals
- Cast aluminum heatsink
- Top mounted controls
- Conformal coated PCB and UV resistant finish for UV & Salt-Fog protection.
- On-board Punch EQ with +18dB boost @ 45Hz.
- Tri-stage protection covers thermal, over-current and short circuits.
- Infrasonic filter
- Remote PLC (Punch Level Control)
Full Range Class-D
A full-range version of the Class-D topology which is a high efficiency amplifier design
Class-D
High efficiency amplifier design that reduces current consumption from the charging system.
| CEA-2006 Compliant: |
 |
| Number of Channels: | 1 |
|
Rated Power (RMS Continuous Power): |
600 Watts x 1 @ 4-Ohm 900 Watts x 1 @ 2-Ohm 1200 Watts x 2 @ 1-Ohm |
|
Total Power (Sum of Rated Power): |
1200 Watts RMS |
|
Dynamic Power (PVC/PowerCube® Measurement): |
| Bridgeable: | No |
| Efficiency (average): |
| Crossover Controls: | Variable 50Hz - 250Hz @ 12dB/octave |
| Tone Controls: | 0dB to +18dB @ 45Hz |
| Signal Input: | Low Level: 1 RCA Pair |
| Signal Output: | Low Level: 1 RCA Pair |
| Power Input Connector: | Block |
| Power Wire Gauge: | 4 AWG |
| Speaker Output Connector: | Block |
| Speaker Wire Gauge: | 12 AWG |
| Heat Sink Type: | Cast Aluminum |
| Cooling: | Convection |
| Remote Controls: | n/a |
| Visual Indicators: |
Power Protect |
| Circuit Topology Class: | Class-D |
| Frequency Response: | 20Hz to 250Hz +/-1dB |
| Shipping Weight: |
7.825 Lbs. (7.82 Kg.) |
| Dimensions (HxWxL): |
1.97" x 6.77" x 11.06" (5cm x 17.20cm x 28.10cm) |
| Compatible Woofer Configurations | ||
 |
||
| The below woofer wiring diagrams are compatible with this amplifier and are designed to optimize power output. The diagrams were selected simply by choosing woofer configurations that match the amplifier's recommended speaker load. Care should be taken to select woofers with a total power rating that can safely handle the amplifier's RMS power output. | ||
|
||
| 1Ω Amp Load Diagrams | ||
 |
||
 |
||
 |
||
 |
||
