Product Description
AUDISON - Bit Ten
Bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities.
Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.
During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels.
The user can configure the output mode of each channel relative to the installed system.
It is designed to be connected with the DRC, Digital Remote Control (optional).
| Power Supply | |
| Power supply voltage | 11 ÷ 15 VDC |
| Idling current | 0.4 A |
| Switched off without DRC | 2.5 mA |
| Switched off with DRC | 4 mA |
| Remote IN voltage | 7 ÷ 15 VDC (1.3 mA) |
| RemoteOUT voltage | 12 VDC (130 mA) |
| Distortion - THD@1 kHz, 1 V RMS Output | 0.005% |
| Bandwidth | 10 ÷ 22 kHz |
| S/N Ratio @ A weighted | |
| Master Input | 95 dBA |
| AUX Input | 96 dBA |
| Channel Separation (@1 kHz) | 85 dB |
| Input sensitivity (Speaker) | 2 ÷ 15 V RMS |
| Input sensitivity (AUX In) | 0.6 ÷ 5 V RMS |
| Input sensitivity (Phone) | 2 ÷ 15 V RMS |
| Input impedance (Speaker) | 2.2 kΩ |
| Input impedance (AUX In) | 15 kΩ |
| Input impedance (Phone) | 2.2 kΩ |
| Max Output Levels | 4 V RMS |
| Inputs Stage | |
| High Level (Speakers) | FL - FR - RL - RR, PHONE IN |
| LowLevel (Pre) | AUX In |
| Outputs Stage | |
| Low Level Pre (Default) | FRPNT L/R, REAR L/R, SUB |
| Connection | |
| From/To Personal Computer | 1xUSB/B(1.1/2.0) |
| To Audison Electronics | |
| Crossover NN.5 (one each output channel) | |
| Filter | FULL / High Pass / Low Pass / Band Pass |
| Linkwitz | 12 / 24 dB |
| Butterworth | 6 / 12 / 18 / 24 dB |
| Crossover Frequency | 68 Step @ 20 - 20KHz |
| Phase Control | 0 - 180 Degrees |
| Equalizer | |
| On Hi-Levels input (Speaker In) | Automatic De-Equalization |
| On Outputs | ± 12 dB @ 31 Band ISO 1/3 Oct. 20 ÷ 20k Hz |
| Time Alignment | |
| Distance | 0 ÷ 510 cm / 0 - 200.8 inch |
| Deley | 0 - 15 ms |
| Step | 0.08 ms, 2.8 cm / 1.1 inch |
| Fine set | 0.02 ms, 0.7 cm / 0.27 inch |
| Size | |
| WxHxD (mm) | 191 x 34 x 131 |
| Weight (kg) | 1.322 |
DRC–Digital Remote Control INCLUDEDDRC is the digital interface between the bit processors and the user.
DRC mounted in the vehicle dashboard with bit Ten D processor, provides:
- ability to select between main, aux and optical inputs
- control of master volume, subwoofer volume, balance and fader
- ability to choose between 2 user-defined memory presets for equalizer, crossover and time alignment settings.
- control of the Audison Thesis amplifiers’ system when these are installed in the same system.
ECK DRCDRC cable extension kit, for installations on especially long vehicles.
RCA Multipole ConnectorEssential connector making link fast and effortless. It expedites connections between low-level (PRE IN) inputs of the head unit (min. 2 volts) and PRE OUT inputs of the bit Ten.
