> PRODUCT > > DSP > AUDISON BIT TEN D

AUDISON BIT TEN D

Ask question about this product

Price : 19500.- บาท


Product Description

AUDISON - Bit Ten D

 

     Bit Ten D is a multi-function digital processor conceived and built to process digital and analogue signal both on the input and on output to the amplifier (featuring AD Link connection) and create top-performance system with any source typology.
  
     Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten D processes the signal with extreme accuracy and wide configurability thanks to a software especially designed for car acoustic peculiarities.

     Bit Ten D features an optical digital input, minimizing interference and degradations of the signal found in traditional analog interconnects, also by-passing the A/D conversion phases of analog signals.
Thanks to the AD Link connection, the available outputs become 8 in total, all in digital format; they can also be used simultaneously with the analog ones (for a maximum of 8 outputs total).
The AC Link is completely dedicated to the “remote control” of the system. The system is comprised of one connector for the provided DRC and one for the amplifiers present in the system. The DRC is supplied with the bit Ten D product.
 
 
 
 
 
Power Supply  
Power supply voltage 11 ÷ 15 VDC
Idling current 0.4 A
Switched off without DRC 2.5 mA
Switched off with DRC 4 mA
   
Remote IN voltage 7 ÷ 15 VDC (1.3 mA)
RemoteOUT voltage 12 VDC (130 mA)
   
Distortion - THD@1 kHz, 1 V RMS Output 0.005%
Bandwidth 10 ÷ 22 kHz
   
S/N Ratio @ A weighted  
Digital Input 105 dBA
Master Input 95 dBA
AUX Input 96 dBA
   
Channel Separation (@1 kHz) 85 dB
Input sensitivity (Speaker) 0.3 ÷ 5 V RMS
Input sensitivity (AUX In) 0.6 ÷ 5 V RMS
Input sensitivity (Phone) 2 ÷ 15 V RMS
Input impedance (Speaker) 2.2 kΩ
Input impedance (AUX In) 15 kΩ
Input impedance (Phone) 2.2 kΩ
Max Output Levels 4 V RMS
   
Inputs Stage  
High Level (Speakers) FL - FR - RL - RR, PHONE IN
LowLevel (Pre) AUX In
Digital Optical S/PDIF Max 96 kHz / 24bit Optical In
   
Outputs Stage  
Low Level Pre (Default) FRPNT L/R, REAR L/R, SUB
  CH 1 - CH 8 S/PDIF
   
Connection  
From/To Personal Computer 1xUSB/B(1.1/2.0)
To Audison Electronics  
   
Crossover NN.5 (one each output channel)
Filter FULL / High Pass / Low Pass / Band Pass
Linkwitz 12 / 24 dB
Butterworth 6 / 12 / 18 / 24 dB
Crossover Frequency 68 Step @ 20 - 20KHz
Phase Control 0 - 180 Degrees
   
Equalizer  
On Hi-Levels input (Speaker In) Automatic De-Equalization
On Outputs ± 12 dB
   
Time Alignment  
Distance 0 ÷ 510 cm / 0 - 200.8 inch
Deley 0 - 15 ms
Step 0.08 ms, 2.8 cm / 1.1 inch
Fine set 0.02 ms, 0.7 cm / 0.27 inch
   
Size  
WxHxD (mm) 191 x 34 x 131
Weight (kg) 1.322
   
   



 

     DRC–Digital Remote Control INCLUDED

DRC is the digital interface between the bit processors and the user.
DRC mounted in the vehicle dashboard with bit Ten D processor, provides:
- ability to select between main, aux and optical inputs
- control of master volume, subwoofer volume, balance and fader
- ability to choose between 2 user-defined memory presets for equalizer, crossover and time alignment settings.
- control of the Audison Thesis amplifiers’ system when these are installed in the same system.
 

 

     ECK DRC
DRC cable extension kit, for installations on especially long vehicles.
 

 

     OP 1.5 • TOSLINK Optical Cable 1,5m / 59,05”
Optical cable ending with Toslink connectors for S/PDIF digital audio signals.
Cable length 1,5 m/59,05”
 

 

OP 4.5 • TOSLINK Optical Cable 4,5m / 177,16”
Optical cable ending with Toslink connectors for S/PDIF digital audio signals.
Cable length 4,5 m/177,16”
 

 

     STA • F/F Socket Toslink adapter
Optical adapter to extend optical cables featuring Toslink connectors.
 

 
     RCA Multipole Connector
Essential connector making link fast and effortless. It expedites connections between low-level (PRE IN) inputs of the head unit (min. 2 volts) and PRE OUT inputs of the bit Ten.